Plastering is a great way to provide watertight seal to the pool. A properly installed plaster or otherwise known as white cement lasts as long as twenty years. However, the plaster degrades slowly over a period of time. When you see all the plaster eroding from the pool, re-plastering becomes mandatory.

Pool plastering job is a big task. However, with the right tool, materials and knowledge, you can do this plastering job all by yourself. When you do the plaster job, it not only saves big bucks but also gives satisfaction.

While doing the plaster job all by yourself, first thing to do is empty the pool, especially if you are using the electrically driven tools. You can use chisel to remove the hanging pieces of plaster and sandblast the entire area with an electric sander. Once you finish removing all the sanding dust from the entire pool, it is the time to apply the white cement. Remember to mix the plaster in a large container according to the manufacturer’s recommendation.

Apply the white cement over the repair patch using a trowel. You can plaster up to one inch at a time. Once you finish the coating, wait for a day for the plaster to dry off. One should be very careful while applying a thick coat over the top edge, as the plaster may sag at this area. Once the plaster is dried up, you can apply the waterproof sealant. You can fill the water as well as other accessories in the pool, once the sealant gets dried up.

After filling the water, you may notice some grayish hue on the plastered area of the pool. However, do not get alarmed, it is nothing but mottling and it is natural in any plasterer jobs [http://plastererjobs.net].

A properly done pool plastering job [http://plastererjobs.net/pool-plastering-jobs/] provides a brilliant, bluish color to the filled water and gives a luxurious look to the swimming pool.

Article Source: http://EzineArticles.com/3877427

Leave a Reply

Your email address will not be published. Required fields are marked *

Name *
Email *
Website

*

You might also likeclose